Bleed Explained
At Mesh Banners, we use a professional grade print guillotine to produce clean and accurate cuts on hundreds of sheets of paper in one pass. Our guillotine is equipped with two types of blades, including a tungsten steel blade and a high-speed steel blade, both of which are sharpened on a regular basis. Despite our efforts to ensure a precise cut, there may be some micro movement as the paper is being cut, causing the edges to be pushed away from the blade. To avoid any white spaces appearing on the corners of your prints, it’s important to add a slight overprint, also known as a “bleed,” around the edges of your mesh banners artwork.
How much bleed do I need?
We advise to add 3mm all around your document, any image or background colours / patterns will need to be extended to the end of this area.
Document set up with no bleed
Document set up with 3mm bleed
Exported PDF with bleed and crops
How do I add bleed to my document?
Indesign
Under File > Document set up in the dialog box that says bleed and slug click into the bleed part and add 3mm on each side.
Illustrator
Similar to indesign except File > New will bring up the document dialog box, add 3mm to all sides.
Photoshop
Photoshop does not have a bleed setting so we recommend setting up your document 3mm bigger all around, so if document is to be printed A4 (210x297mm) set up as 216 x 303mm.
Illustrator bleed dialog box
Safe Area
To maintain the visual appeal of your mesh banners artwork, we advise working with a safe area, also known as a margin. Unlike bleed, the margin sits within the artwork and is typically used to display important text, headings, or information on top of the background. Although your type layout may appear properly spaced on a screen, it can appear cramped and uneven once printed onto the material. To ensure optimal results, we recommend a minimum margin of 5mm for smaller printed items and up to 25mm for larger items such as mesh banners.
Safe Area
To keep your artwork looking clean and aesthetically pleasing we recommend working with a safe area or ‘margin’, not to be confused with bleed this area sits within the artwork and is generally used for text and headings or important information on top of your background area, your type layout on screen can look fine if its a couple of millimetres in from the edge but once it is printed onto its chosen material it will appear cramped and uneven.
We recommend a margin of at least 5mm for smaller printed items and for larger items such as banners go up to around 25mm.
If you are unsure about bleed and your artwork or have any questions then call us on 023 8087 8037 or email us.